12T Brushed Motor Combo Set for 1/10 RC Truck

We kindly advise you: Please do not always work the motor. Typically, you can operate it for 15-20 minutes, then allow the motor to cool down for a while, around 30 minutes, before continuing to play.

The recommended model: - Only suitable for use with a 2S battery - RC Motor Features: - Brushed 80A ESC Type - Brushed Waterproof level: IP65 - Forward: Persistent current/Peak current: 80A/320A - Reverse: Persistent current/Peak current: 40A/160A - Voltage: 7.4V (2S Lipo) / 6V-8.4V (5-7 cells NiMH) - BEC Output: Switch Mode: 5A 7.4V/6.4V - Adjustable Running mode: Crawlers & High Speed Adjustable (Forward / Reverse) - ESC Programing via: Program Port Jumper Cap - Input Connectors: T Connector - Output Connectors: 4.0 Bullet Connectors (Female) - Size: 42x35x27mm - Weight: 50g

Motor Specifications: - Item Name: 550 21T Motor - Color: Black - Size: 550 Turns: 21T - Watts: 78-137W - RPM: 12800 - Voltage: 7.2V-12.6V - Current: 1.42A - Resistance: 0.0043 - Max RPM: 12800 - Diameter: 35.6mm - Length: 57.5mm - Length of extend shaft: 16.5mm - Shaft diameter: 3.175mm - Connector: 3.5mm - Weight: About 232g

Please note that there may be some deviation due to manual measurement.

LED Programming Card: - Initial Start Force: 5%, 13%, 21%, 32% (default value 5%) - Drag Brake Force: 100%, 90%, 80%, 70% (default value 100%) - Maximum Reverse Force: 95%, 75%, 50% (default value 95%) - 3 Start Modes (Also called "Punch") from "soft" to "very aggressive" (default value Medium)

Packing List: 1 * Brushed 80A ESC 1 * 12T Brushed 550 motor 1 * LED Programming Card 1 * User manual

This set is an updated and enhanced package. The conventional 550 motor set ESCs on the market are all 60A. We use an 80A ESC, which can better solve the fire problem caused by the overcurrent and overload of the ESC, allowing you to use it without worry.

The high-quality components and waterproof, dust-proof design allow the Globact 550 motor 80A ESC Brushed to be used in all weather conditions without any issues of damage caused by water or dust.

The ESC features multiple protections, including low voltage cut-off protection for lithium or nickel battery, over-heat protection, and throttle signal loss protection. Note: The ESC signal cable has reverse connection protection, but the power cord does not.

With the included programming card, you can customize the ESC settings to your preferences.

To use the set, follow these steps: 1. Connect the BEC cable to the receiver. 2. Connect the motor lead to the ESC. 3. Turn on the transmitter. 4. Connect the battery pack to the ESC, and then turn on the ESC. 5. When the connection between the motor and the battery is completed, the motor will beep. 6. When the throttle stick is in the neutral position, the electric motor will beep again. 7. The ESC is now ready for use.

product information: